Eibach Pro-Street-S coilover kit – Audi Q2 quattro, Skoda Superb 3V, VW Passat B8 – 20-70/25-80 mm – PSS65-79-012-02-22
Product details:
– product: Eibach Pro-Street-S
– Lowering: 20-70/25-80 mm
– manufacturer part number: PSS65-79-012-02-22
Approvals and certificates:
– TÜV parts certificate (Teilegutachten) included
Warranty:
2 years + 3 years extended Eibach manufacturer’s warranty when you register on their website
Axle load:
Front: 1200 kg
Rear: 1250 kg
Notes:
– On vehicles with factory-lowered suspension, the drop is reduced by the factory lowering. Not suitable for vehicles with factory-raised suspension.
– Not suitable for vehicles with self-levelling suspension.
– The front axle is height-adjustable via threaded dampers, the rear via a height adjustment unit.
– Only for vehicles with a 55 mm front damper diameter.
– In some cases, additional original parts are needed for fitting (see the manufacturer’s technical documentation).
– After fitting, the electronic damper control no longer works and a fault message appears, which an authorised workshop can clear. We recommend Pro-Tronic if it is available for your vehicle.
– If replacement is required, the components are listed in the certificate under “changes to the vehicle documents”.
– For vehicles with independent rear suspension.
- Brand:Eibach
- Suspension:Coilovers
- TÜV certificate:with TÜV certificate
1.255,00 €
Every €10 spent = 1 loyalty point
Fits
4 vehicles · 3 makes
| Vehicle | Engine | Year | Lowering | Note |
|---|---|---|---|---|
| Q2 GAB | 2.0 TSI quattro, 2.0 TDI quattro, 35 TDI quattro, 40 TFSI quattro | from 06/2016 | 45-70/55-80 mm | |
| Q2 GAB | SQ2 | from 08/2018 | 20-45/25-50 mm | |
| SUPERB III 3V3 | 1.4 TSI, 1.8 TSI, 2.0 TSI, 1.6 TDI, 2.0 TDI | from 03/2015 | 30-55/30-55 mm | Not suitable for four-wheel-drive vehicles. |
| PASSAT 3G2, CB2 | 1.4 TSI, 1.8 TSI, 2.0 TSI, 1.6 TDI, 2.0 TDI | from 11/2014 | 30-55/30-55 mm | Not suitable for four-wheel-drive vehicles. |
This vehicle is not on the list. Check the spelling or choose your vehicle at the top of the page.














