KW V3 inox coilover kit – Cupra Born K1; VW ID.3 E1 – 352800EJ
KW coilover kit
Product details:
– manufacturer part number: 352800EJ
– Damper material: stainless steel
– Lowering (front/rear): 20-55/20-55 mm
– Height adjustment (front/rear): threaded/threaded
– Damping adjustment: rebound and compression
Approvals and certificates:
– TÜV certificate for approval included
Warranty:
– 1 year
Notes:
– Height-adjustable front and rear (coilover struts at the front, height-adjustable springs and dampers at the rear)
– On vehicles with electronic damper control, it must be deactivated. You will find the vehicle-specific KW cancellation kits in the accessories table.
– The dampers are adjusted with simple knobs. Rebound damping can only be adjusted if the top of the piston rod is accessible (depends on the vehicle version).
– At speeds between 70 and 110 km/h and with lowering of +30 mm, slight vibrations may occur due to the axle kinematics. If they are bothersome, reduce the lowering.
- Brand:KW suspensions
- Suspension:Coilovers
2.124,00 €
Every €10 spent = 1 loyalty point
Fits
2 vehicles · 2 makes
| Vehicle | Engine | Version | Year | Axle load (front / rear) | Lowering (front / rear) | Note |
|---|---|---|---|---|---|---|
| Cupra Born (K1) | 150–240 kW | 2WD; Born 150 kW (77/82 kWh), 170 kW (77/82 kWh), 240 kW (79/84 kWh) | from 02/2022 | up to 1110 / up to 1370 kg | 20–45 / 20–45 mm | without electronic dampers |
| ID.3 (E1) | 150–240 kW | Pro S, Pro S Performance, GTX, GTX Performance | from 07/2020 | up to 1110 / up to 1370 kg | 30–55 / 30–55 mm | |
This vehicle is not on the list. Check the spelling or choose your vehicle at the top of the page.
